Skip to content
WATCHES AND JEWELRY

Our solutions for the watches and jewelry sector

Located in the heart of the Swiss watch industry, we are familiar with the demanding quality require­ments. We are your efficient and expert partner for any questions related to your advanced materials.

We support you in every stage of your value creation process

From product development to market launch and throughout the lifespan of watch and jewelry products, we are your reliable partner for materials testing.

Flexible tab(Tab id: module_17108202438257)
    To utilize this module, drag and drop the "Grid options" to the desired section you want to transform into a tab content. Then, add the tab ID. For step-by-step instructions, please refer to: https://zeroheight.com/75eebd230/p/77144b-tab/b/9773fa.
    , Tab enable
    (Tab id: module_17108202438257; Tab name: Product development)

    Product development

    We support you in your product development, for example with:

    • Finding the best alloys and material combinations for your project
    • Testing your prototypes, for instance, with mechanical testing
    • Conducting packaging tests

    Our expertise and state-of-the-art testing methods help you meet the highest quality standards and bring your products to market readiness. Rely on our comprehensive support and experience in the watch and jewelry sector.

    , Tab enable
    (Tab id: module_17108202438257; Tab name: Planning / Quality control)

    Planning / Quality control

    We support you in your process development, for example with process validation, defining your raw material specifications, or developing testing procedures for incoming material inspections or quality control. Additionally, as an accredited material testing laboratory, we are fully equipped to carry out quality inspections for you.

    , Tab enable
    (Tab id: module_17108202438257; Tab name: Production)

    Production

    Do you need a test for a component or a semi-finished product from your production?  Do you need verification of a component’s composition? Does the cleanliness of surfaces need to be checked? Are you looking for the cause of a defect? You’ve come to the right place.

    , Tab enable
    (Tab id: module_17108202438257; Tab name: Sales and services)

    Sales and services

    The product you purchased doesn't meet expectations, or a customer has complained about your product? As an accredited material testing lab, we are the go-to resource for an objective and impartial expert opinion.

    We are also happy to provide support if you require objective test data for your marketing.

    What advantages does partnering with us offer you?

    Beyond the services we offer to our customers, our staff also take part in internal and external research projects, allowing them to constantly broaden their horizons.

    You benefit from this ongoing knowledge growth in the form of quick and creative solutions to your challenges.

    mark of execution-1 mark of execution-1

    «Over the past few years, we have utilized RMS's services multiple times. We value our collaboration with the RMS Foundation because it allows us to easily access h high-standard analytical methods of scientific quality.»

     

    Carlo Weingart
    MC Micro Crystal Switzerland
    mark of execution-1 mark of execution-1

    «The expertise and resources of the RMS Foundation enabled us to deepen our knowledge of our ceramics. This has helped, and continues to help, in the development and optimization of our manufacturing processes. The open and creative exchange and mindset were key contributors to the success of our collaboration.»

     

    Thomas Gyger
    Materials Engineer, Bangerter Microtechnik AG
    mark of execution-1 mark of execution-1

    «I appreciate very much our collaboration and the nice, fast and trustworthy service that you offer.»

     

    Anonymous from Watch Industry
    mark of execution-1 mark of execution-1

    «We appreciate working with the RMS Foundation because we depend on quick and top-quality analyses, and the RMS Foundation consistently provides them.»

     

    Tobias Moser
    CEO / Head of Sales, Galvano Wullimann Metallveredelung
    mark of execution-1 mark of execution-1

    «Collaboration with the RMS Foundation is very enjoyable, particularly the highly professional SEM analyses performed by the well-qualified and helpful experts. Even with the most urgent and short-notice requests, we are always served with great courtesy. Deadlines are crucial, and we have never been let down by RMS in this respect.»

     

    Dr. Johann Rechberger
    Head of Materials and Surface Technology, Fraisa

    Explore our case studies

    Here, we present a selection of case studies from the watches and jewelry sector that we work on, to give you an impression of our expertise in this exciting field.

    If you have any questions, our experts are always available to assist you.

    Fallbeispiele_Uhrwerk-template_3x2-1 https://144287743.fs1.hubspotusercontent-eu1.net/hubfs/144287743/01%20Bilder%20-%20Logos%20-%20Icons/Bilder%20Blog/Fallbeispiele_Uhrwerk-template_3x2-1.jpg

    Contaminations on tiny components

    Both watch mechanics and jewelry in general must be impeccably clean. However, it can happen that tiny impurities are found during production or after servicing, and the source or cause must be identified. FTIR microscopy enables the detection of minute oil residues and, ideally, the identification of the specific oil based on its distinctive IR spectrum.

    Fallbeispiele_Uhrwerk2-template_3x2 https://144287743.fs1.hubspotusercontent-eu1.net/hubfs/144287743/01%20Bilder%20-%20Logos%20-%20Icons/Bilder%20Blog/Fallbeispiele_Uhrwerk2-template_3x2.jpg

    Development of new premium materials

    New premium alloys are made up of various individual components. Using different analytical methods, the exact composition of the material can be determined, allowing for the development of a reproducible manu­facturing process. Useful analytical methods include ICP mass spectrometry (ICP-MS), X-ray fluorescence spectroscopy (XRF), and optical spark emission spectroscopy (OES).

    Which questions are frequently asked about our services?

    How do I find a suitable test method for my specific issue?

    Discuss your concerns with our experts. They will be happy to help you determine the best course of action.

    How many samples should be tested?
    This depends on the specific question: A comprehensive test ideally consists of 3 samples from 3 different production batches. In case of issues, we recommend comparing 3 “bad samples” with 3 “good samples.” This also provides a certain level of statistical reliability.
    I'm not sure what exactly my problem is or how to phrase it. Am I still in the right place at RMS?
    Absolutely! We'll go over the issues with you and collaborate to get to the underlying causes. Once a potential solution is identified, we’ll be happy to conduct the necessary testing.
    What does the RMS Foundation need in order to conduct an analysis?
    Typically, we require the sample material and a binding test order. This can be a formal order based on a quotation or even an informal e-mail.
    What do the services of the RMS Foundation cost?
    The nature and number of samples can have a major influence on the test costs. We will be happy to provide you with a quote tailored to your specific inquiry.
    I urgently need an analysis. Can I bring my samples to the RMS Foundation right away?

    You are welcome to drop off your samples. Just give us a quick call beforehand and we’ll take care of them. Depending on our workload, we’ll process them right away. If it's extremely urgent, we also offer express services.

    Are the services offered accredited?
    Yes, our services are validated and accredited in accordance with ISO/IEC 17025. If a required service has not yet been validated, we can easily validate it for you.
    How long does it take until I receive my results?

    We usually process smaller orders within 10 working days (within the limits of our technical and human resources). Contact us for clarification of prioritized processing for an additional charge. For larger projects, we will be happy to propose a customized schedule.

    How do I get my results?

    We usually communicate the test results to you in the form of a test certificate. If desired, we can prepare a more detailed report for you in which we can statistically process and interpret the results and/or make recommendations. We will be happy to send you both with a digital signature.

    How does the RMS Foundation ensure the confidentiality of my data?

    As an ISO/IEC 17025 accredited laboratory, confidentiality is our top priority. Further information on how we handle your data can be found in our General Terms and Conditions. Please contact us regarding additional protective measures for particularly sensitive data.

    Companies that trust us

    Roman_Heuberger_1850x1233

    Who is your contact person?

    Roman Heuberger
    Dr. sc. ETH Zurich, Certified Materials Engineer ETH
    Head of Materials Testing and Consulting
    Phone  +41 32 644 20 22